Inspection lines, Light-vehicles

Inspection lines LV

Suspension bench for Light Vehicles (LV) inspection

Suspension bench for Light Vehicles (LV) inspection

Series. AM46600 / AM55900 / AM55950

Equipment for vehicle technical inspections of suspension

This suspension alignment measurement bench uses the EUSAMA method. It guarantees excellent measurement reproducibility and a precise analysis of the shock absorption measurement on the left and right sides of the vehicle. It can dynamically test vehicles with an axle weight of 2.5 t and statically test vehicles with an axle weight of 3.5 t. The motors are sufficiently powerful to prevent wheel spin and, therefore, also prevent rapid wear of the drive belts. The additional sensors are used to make so-called “Expert” measurements that isolate the measurement of the shock absorber and check its wear. These suspension benches are available in galvanized finish.

Suspension bench, Inspection Lines - Vehicle test lanes, ACTIA® Automotive.
Suspension bench - Suspension tester for light vehicles (LV) inspection.
ACTIA® Automotive.
Technical featuresAM46600AM55900AM55950 LargeLight Vehicule (LV) Inspection Lines, Suspension bench for light vehicle. Innovation, ACTIA® Automotive.
Bench dimensions (LxWxH) 2 300 x 600 x 280 mm 2 320 x 600 x 280 mm 2920 x x600 x 280
Weight 300 kg 280 kg 320 kg
Min. and max. track width 802 / 2 100 mm 800 / 2 200 mm 800 / 2 500 mm
Lane capacity 3 500 kg 3 500 kg 3 500 kg
Weighing capacity (axle) 3 000 daN 3 000 daN 3 000 daN
Dynamic testing capacity 3 000 daN 2 500 daN 2 500 daN
Excitation amplitude ± 3 mm ± 3 mm ± 3 mm ± 3 mm
Measurement procedure EUSAMA EUSAMA / EXPERT EUSAMA / EXPERT
Electric motor 3kw 2.2kw 2.2kw
Bookmark and Share